ROUTER DESCRIPTION
21
6.2. Start router
The router is set up connecting the power supply to the router. In the default setting
the router starts to login automatically to the preset APN. Device on the Ethernet port DHCP
server will assign addresses. The behavior of the router can be modified by means
of the web or Telnet interface, which is described in the configuration manual.
The power consumption during receiving is 1W. The peak power consumption during
data sending is 5,5W. For correct operation it is necessary that the power source is
able to supply a peak current of 600mA.
6.3. Router configuration
Attention!
If the SIM card is not inserted in the router, then it is impossible to operate.
The inserted SIM card must have activated EDGE/GPRS.
6.3.1.
Configuration over web browser
Monitoring of the status, configuration and administration of the router can
be performed by means of the web interface, which is available after insertion of IP address
of the router into the web browser. The default IP address of the router is 192.168.1.1.
Configuration may be performed only by the user "root" with initial password "root".
A detailed description of the router settings via the Web interface can be found
in the configuration guide.
6.3.2.
Configuration over Telnet
Monitoring of status, configuration and administration of the router can be performed
by means of the Telnet interface. After IP address entry to the Telnet interface it is possible
to configure the router by the help of commands. The default IP address of the router is
192.168.1.1. Configuration may be performed only by the user "root" with initial password
"root".
A detailed description of the router settings via the Telnet interface can be found
in the configuration guide.
