49
Always store the resin bottle vertically after removing it from the heating circuit filling
station or cap!
/
Use the keypad to select the new bottle type (see chapter 6.3).
The display will now show the remaining capacity of the new bottle.
/
Install and bleed the new bottle (see chapter 5.4).
/
Completely open the upstream and downstream shut-off valves and continue the filling process if nec-
essary.
/
Dispose of the consumed bottle with general household rubbish.
6.8
CONVERSIONS/CHANGES/SPARE PARTS
6.9
INTERRUPTION OF OPERATION
To stop the flow of water to the heating circuit filling station, the upstream and downstream shut-off valves
must be closed.
When disassembled, the heating circuit filling station must be stored in a dry and frost-free location and
protected against contamination and damage.
7
FAULT
When replacing a bottle, the cap of the replacement bottle is unscrewed. It can be
used on the consumed bottle to prevent water from running out.
Only original spare parts may be used!
Unauthorised conversions and changes are forbidden for safety reasons. These
can impair the functioning of the heating circuit filling station and cause leaks.
The imprinted approval marks are only valid if original spare parts are used.
Opening of devices and replacement of parts subject to water pressure must only
be performed by licensed persons to ensure the safety and leak-tightness of the
devices.
