CONDTROL Auto RotoLaser, Руководство пользователя

Страница: 7 / 21

ROTARY LASER
CONDTROL Auto RotoLaser
ROTARY LASER
CONDTROL Auto RotoLaser
12 13
user manual user manual
EN EN
Turn on/off the product
Press button , to turn on/off the product. When the product is
on, power indicator is on as well. After turn off the product power
indicator will go out.
OPERATION MODES
Automatic mode (build horizontal/vertical plane)
Place the product on a flat surface, tripod 5/8” or universal mount in
horizontal or vertical position.
Turn on the product. Power indicator turns on as well.
Laser beam is blinking while self-levelling. As soon as self-levelling is
finished rotary head starts rotating clockwise at 600 rpm. Turn off the
product.
Manual operating mode indicator starts to blink when the instrument
is out of the range of automatic compensation (5°). Laser beam will
blink, rotary head will not rotate. Turn off the product and turn it on
again.
Press button to switch to tilt mode. Tilt mode indicator will flash
red. If the product is unbalanced by some external influence, it will
not perform self-levelling again. Turn off the product, then turn it on
and repeat operation.
Manual mode
This mode allows construction of laser planes at any angle inclination.
Place the product on a solid and flat surface. Turn on the product.
Power indicator turns on.
Laser beam is blinking while self-levelling. As soon as self-levelling
is finished rotary head starts rotating clockwise at 600 rpm. Press
button on the product or button on remote control. Manual
mode is activated, manual mode indicator becomes red. Install the
product at required angle and fix its position.
To exit from manual mode and return to automatic mode press
button on the product or on remote control. Manual mode
indicator will turn off.
Top plumb dot
The product allows working with top plumb dot. It is on in any
operation mode of the product.
Rotation speed
Use remote control to run this function.
Speed 600 rpm is default. Press button to switch between
speeds of rotary head. Rotation speeds change in the following way:
600-0-120-300-600 rpm.
Attention! The slower rotation speed, the brighter laser beam.