Condre CD Tracer, Руководство пользователя

Страница: 8 / 43

Getting Started Condre CD Duplicator
4
Copy an Audio CD Now!
Overview This procedure explains how to set the system up for CD to CD duplication
and how to make a copy of a master audio CD.
The purpose of this procedure is to give you a quick start to using the CD
Tracer Duplicator. You will learn more advanced procedures, such as how
to set up for duplicating Karaoke CD masters, how to load various tracks
from multiple CDs into a partition on the hard drive, how to copy up to
seven CDs at a time, etc., once you have learned a few of the basic
procedures.
Select “Copy”
for the
Operation
Mode
1. Turn on the system. Note the mode of operation in the LCD display area
(
copy, emulate
, etc.). If
copy
is not already displayed as the current
mode of operation, press the
Mode
button until
copy
is displayed.
Your LCD display should look something like this:
Access the
Sub-Function
Menu 2. Press and hold the Mode button until you hear the system “chirp.” Then
release the Mode button. You should see
setup
displayed in the LCD
panel:
Back to
“Copy” Mode
3. Press the Go button, and note that the
copy
mode is once again
displayed. (In this case, all other sub-function defaults will be used, so
there is no need to change any other sub-function options at this time.)
Insert the
Master CD 4. Place the master CD in the first CD drawer. Use the Open/Close button
to open and close the CD drawer.
copy
<mode
A553M62:57
Go>
setup
<mod
A553M62:57
copy
<mod