18
To set the
Depth Range
:
a) Press
MENU
to enter into menu setting.
b) Repeatedly press
MENU
to switch to
Display
menu.
c) Use the
Up / Down Arrow
to select
Depth Range
option.
d) Press
ENT
to enter into setting.
e) Use the
Up / Down Arrow
to increase / decrease the value.
f) Press
ENT
to confirm and exit the setting.
Note:
after you enter into the setting by press
Ent
key, the operation figure will change
from A to B, then just
Down Arrow
key to change levels.
Sometimes you may encounter such a problem: there is a “second bottom” displayed as
sonar return, even you know that is impossible.
Such problem occurs due to a very low water or the bottom is so hard, which enable the
sonar returning so strongly.
To resolve this problem:
a) Try increasing the Noise Reject to a proper value
b) Change the Depth Range to a value which is very close to the true depth.
Zoom Range
Zoom Range is used to enlarge some certain depth segment, which is helpful for you to
see small details, fish signals and bottom structure. Your fishfinder has a wonderful
performance to see any depth segment with any scale.
For example, if the current Depth Range is 0~40m, by setting Zoom Range to 20~25m,
you can see the sonar image of the 20~25m depth segment with a 8x scale. And by setting
it to 20~30m, you can see the sonar image of the 20~30m depth segment with a 4x scale.
To set the
Zoom Range
:
a) Press
MENU
to enter into menu setting.
