Page
7 of 9
Condeco 10.1’’ Room Screen Mounting Instructions
Mounting on Glass
The following illustration shows a Condeco screen mounted to Glass. When mounting on
glass we recommend that the use of the following materials.
To fix the screen to the Glass wall, you will need to use the pre cut strips between the back
plate and the Vinyl. We recommend using 2 of the strips per screen, placed on to the Vinyl.
The back plate attaches to the Strips, and the strips are attached to the Vinyl.
Firstly, the vinyl is attached to the glass (Please review the 3M Application Instruction
document for wet application procedure. Ensure the vinyl is allowed to dry for at least 24
hours before continuing). The strips are then attached to either the Vinyl or the back plate
and finally the back plate is pushed onto the vinyl.
Part Numbers:
CO-T201502-GMK for the 10.1” V2 Condeco screens.
Kit Contents:
1 x pre-cut silver/aluminium colour vinyl with shaped corners – 183mm x 247mm
1 x pre-cut silver/aluminium colour vinyl with shaped corners – 120mm x 214mm
3 x pre-cut strips of 3M 4941 VHB tape 110mm x 25 mm.
Screen
Back Plate
Vinyl
VHB Tape