55
Maintenance
7.4.2.4 Removal and installation of the fill cup and the hoses
To remove the fill cup and the hoses, the steam cylinder (see
) and the cover of the
) must be removed.
a
b
Fig. 15: Removal of the fill cup and the hoses
1. Loosen the hose clamps, pull all hoses in the device off the connections and remove the hoses.
Note: The hoses connected to the fill cup can also be removed together with the fill cup and only
removed from the connections on the fill cup afterwards.
2. Press the snap lock on the rear wall backwards (a) and slide the filling cup downwards (b) and re-
move it.
3. Loosen the tabs on the lid of the filling cup and lift the lid off.
The
installation
of the filling cup and the hoses takes place in the reverse order of the removal. Check
hoses for damage before installation and replace if necessary. Before attaching fixing the hoses with
the hose clamps, align the hoses so that they are not twisted.
Содержание RH 1.8
Страница 66: ...Notes...
Страница 67: ......
Страница 68: ...CONSULTING SALES AND SERVICE CH94 0002 00 Condair Group AG 8808 Pf ffikon SZ Schweiz www condairgroup com...