9
Nortec RS Steam Humidifier
Nortec RS
2596995_0_EN_1905
Part numbers and quantities for ordering Nortec RS options are shown in
.
Table 5: Nortec RS Options, Part Number Matrix
Nortec RS
unit size S
unit size M
unit size L
10
15
20
30
45
65
90
90
130
180
Process/Precision
Provides capability of humidifier
to achieve ± 1% humidity control*.
Solid State Relays allow for rapid re-
sponse upon call for humidity, adapt-
ing instantly to humidity demand.
This allows for quick response and
tight control of humidity. Also sup-
plied are two fill valves for quicker
response (turbo mode). This option
is also recommended any time that
the humidifier is being controlled by a
modulating signal.
* Humidity control is dependent on a
variety of factors, including design of
piping from humidifier to distributor,
duct characteristics from distributor to
space, control devices and locations.
In-field results may vary.
1x P
Scale tank
Provides a separate reservoir under-
neath the steam cylinder for scale
collection. The addition of this option
reduces maintenance time significant-
ly. Minerals removed from the water
during steam production will collect
in the scale reservoir rather than in
the tank. For the double tank humidi-
fiers (RS 135 and 180), order two for
each humidifier. This option is recom-
mended any time that the humidifier
is being supplied with potable water.
1x SC
(2x SC for RS 90 large unit)
2x SC
Built-on Blower Pack
For in-space applications.
1x BOBP
not available for
large unit
Remote operating and fault indica-
tion
PCB with relay contacts for the con-
nection of remote displays for "Opera-
tion", "Steam", "Fault" and "Service".
1xRFI
Accessory Board
PCB with relay contacts for the con-
nection of remote fan enable (cylinder
A/B) as well as hygiene flush (cylinder
A/B).
1x ACC
BACnet MSTP BTL
PCB to provide BTL certified BACnet
MSTP. This option also enables full
Master functionality when using BAC-
net MSTP.
1x BAC-BTL
LonWorks board
Supplementary board to connect the
Nortec RS to a building management
system via LonWorks.
1x LON