7.2 Please connect the black wire to ground.
7.3 After connecting the power cord, run the power cord plug to the
device. After installation, supply power to device.
7.4 Covert installation: car battery cord is standard, with 2A FUSE for
short-circuit over current protection.
7.5 Non covert installation: cigar lighter cord is optional, with 2A FUSE
for short-circuit over current protection. Please contact your dealer if this
mode is needed.
8. Power On/ Off
8.1 The device will power on automatically when connected to power.
During normal operation, red power LED flashes, while blue GPS LED
and green GSM LED keep lighting. During signal searching process, GPS
or GSM LED will flash. If there is no light presenting on LEDs, the
device is not working normally.
8.2 The device will power off after power is disconnected.
9. Side Key Function
At normal-work indication status, press the side key, all the three LEDs
will extinguish and then the device will enter covert working mode. Press
the key again; the three LEDs will go back to normal-work indication
