5. Main Functions
5.1 SOS
In emergent case, press SOS for 3 seconds to activate SOS alarm.
Then the device will send SOS SMS to preset SOS numbers and
then dial the numbers in a loop for 3 times until the call is picked up.
Alarm message will also send to platform. (See command list 7-8)
5.2 Power cut-off alarm
When the electricity supply of device is cut off, it will activate cut-off
alarm.
5.3 Low battery alarm
When battery is low, the device will activate low battery alarm.
5.4 Vibration alarm(default OFF)
When vehicle vibrates several times, the vibration alarm will be
triggered. If no ignition after 3 minutes (ACC OFF), the device will
send vibration alarm message immediately.(See command list 7-12)
5.5 Voice monitoring
1.
2.
voice
Notice
When MIC and speaker are connected, use pre-set SOS number to
send command
to the device. Device would automatically call
you back in a second. Pick up and monitor the voice inside the
vehicle.
When MIC is connected while speaker is not, use pre-set SOS
number to dial the device, after 10 seconds, device enters into
monitoring mode automatically. The caller can hear the
inside
the vehicle.
1.Pre-set SOS number is necessary.
Non-SOS number cannot activate this function.
2.SIM card of device must have caller ID sevice.
JT#
