Page 5
TURNING ON THE UNIT
1. In standby mode, press and
hold the
MEM
button for
about 3 seconds until time
format blinks on display.
2. Press the
TUNING/
SKIP
buttons to set 12
Hour or 24 Hour time format.
3. Press the
MEM
button,
the Hour blinks.
4. Press the
TUNING/
SKIP
buttons to set
correct hour.
5. Press the
MEM
button,
the Minute blinks.
6. Press the
TUNING/
SKIP
buttons to set
correct minute, and then
press the
MEM
button to
start the clock.
CLOCK SETTING
TO TURN ON THE UNIT
Press the POWER ON/OFF button, the POWER
ON indicator will light up. Select the desired
function and the corresponding function indicator
will light up.
TO TURN OFF THE UNIT
Press the POWER ON/OFF button to STANDBY,
the POWER ON indicator will turn off and the
clock display will be shown.
TO ADJUST VOLUME
ADJUSTING THE SOUND
TO SELECT X-BASS (for remote only)
X-BASS
is designed specifically to boost the low
frequency sound to obtain a more powerful bass.
Note: Press the
X-BASS
button, the indicator of
X-BASS will light up.
Note
:
Your unit is factory preset in 12 hour display.
However, if there is a power failure or the unit
has not been connected to power for a long
period of time, the display may shift to 24 hour.
TO ADJUST TREBLE AND BASS
Turn the knobs to adjust the treble output and
bass output.