Page 9
PRESET
REPEAT
1. Press the
MEM
button.
3. Press the
MEM
button again.
2. Press the
SKIP
buttons to select
the desired tracks.
4. Repeat step 2 and 3 to program additional
tracks, after you have finished program and
memory indicator is blinking on display. Press
PLAY/PAUSE
button to start playback of
the programmed tracks and memory indicator
will appear on display.
To check the program
While in the stop mode, press the
MEM
button.
The disc, track and program numbers will appear
on the display.
Press the
MEM
button again to view the other
programmed selections.
These displays do not appear during programmed
play.
To play the programmed tracks
Press the
PLAY/PAUSE
button.
To stop programmed play
Press the
STOP
button, if you want to recover
programmed play. You can first press
MEM
button and then press
PLAY
button.
To clear the memory content
Press the
STOP
button and then open the CD
door or press
MEM
button and then press the
STOP
button in stop mode.
REPEAT PLAY (for remote only)
This function will allow a single tracks or all the tracks on the disc to be played repeatedly.
TO REPEAT THE SAME TRACK
Press the
PRESET/REPEAT
button once during
playback, the repeat one indicator will blink.
TO REPEAT THE WHOLE DISC
Press the
PRESET/REPEAT
button a second
time to repeat all tracks, the repeat all indicator
will light.
TO CANCEL REPEAT PLAY
Press the
PRESET/REPEAT
button until REPEAT indicator is switched off.
PROGRAMMING TRACKS - in a CD stop mode (Up to a maximum
of 20 tracks)
PRESET
REPEAT
