ENGLISH
38
Audio Setup
- Digital Audio Output
Set the output signal for the digital output. (Off, RAW or PCM)
- Analog Audio Output
Set the output signal for the analog output. (Stereo, Mono L/R, Mix Mono)
Video Setup
- Brightness
Change the brightness of the output signal.
- Contrast
Change the contrast of the output signal.
- Hue
Change the hue of the output signal.
- Saturation
Change the saturation of the output signal.
Other Settings
- Screen Saver
Set the inactivity time for the screensaver. (Off, 1~30 minutes)
- Photo Display Setup
Change the way photo’s are shown. (List, Thumbnail)
- Side Show Time
Change the time between 2 photo’s in a slideshow.
(1~30 seconds, 1~3 minutes)
- Music Auto Play
Change the Music Autoplay mode. (Off, One Time, Repeat)
- Video Resume Playing
Change the Video Resume mode. (Ask, Always, Off)
- Play Next Video
Play the next video when a video is finished. (Enable, Disable)
When the settings are changed, press the ‘
Back
’ (
8
) button on the remote control to return to the main
Setup menu.
6.3
Version
In the ‘
Version
’ menu, you can see the current firmware version or upgrade your firmware.
Reset To Default
Set the unit back to the factory default settings.
Firmware Upgrade
- Internet Upgrade
Upgrade the firmware through the internet. The unit will automatically
search online for a new version if the unit is connected to the internet.
- USB Upgrade
Upgrade the firmware through a USB storage device.
Note:
Do NOT power off the unit when you are upgrading the firmware. This will damage the unit and
makes it unusable!
When the settings are changed, press the ‘
Back
’ (
8
) button on the remote control to return to the main
Setup menu.
When you are finished with the Setup of the unit, press the ‘
Back
’ (
8
) button or the ‘
Home
’ (
27
) button
on the remote control to return to the main menu.
