13
3.8 How to control PTZ
【
Zoom
】
Lens in the current play far closer picture, use the mouse wheel also can undertake variable times control.
【
Focus
】
Slight adjusting the focal length
【
Iris
】
Aperture size adjustment
【
Speed
】
Through the slider adjust rotation stepinterval, yuntai mainly used to control direction operation, the step length of turning the faster yuntai.
【
Preset
】
Adjust the camera Angle, then direction and the corresponding input and clicking on [ set] button, preset dots to set the dots in the preset rastelli.
Input presets dots and click on [Transfer] button, the camera will be transferred to the preset point corresponding position.Click[remove ] button, this presets dianjiang
be cleared
【
Set
】
Click
【
Start Tour
】
the trajectory of said no corresponding, click the
【
add Preset
】
and
【
delete Preset point
】
,
【
Clear Tour
】
the cruise lines.
【
Start Tour
】
begin to track record, was registered date
【
end Tour
】，
thus set up from the corresponding track circuit.
【
Left Limit
】
Began to limit scanning Settings, was registered date
【
right Limit
】
, thus set up corresponding limit scanning.
【
Add Preset
】
Add presets point to the cruise lines.
【
Delete Preset
】
Cruise lines from deleting preset points.
【
Clear Tour
】
Remove the cruise line designated.
Note
: some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.
【
Control
】
PTZ Control
【
Tour Scan
】
Point between cruise control.
【
Pattern Scan
】
Track patrol control.
【
PTZ Reset
】
Remove all Settings, original reset to the original state.
【
Limit Scan
】
Yuntai boundary scan control around.
【
Auto Pan
】
Remove the cruise line designated
Note
:
some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.