ENGLISH
49
When the Username and Password are correct the router will display the “
Device Settings
” overview.
D.
Select “
Advanced
”, “
Virtual Server
” in the top navigation menu.
You will see the following “
Virtual Server
” configuration page.
Note:
In the picture below you will see an example of a Virtual Server configuration.
E.
Set the Virtual Server rule to “
Enabled
”.
F.
Enter a name for your Virtual Server Rule in the “
Name
” field.
G.
Enter the IP Address of your computer/server which needs the Virtual Server rule.
H.
Select the Protocol for your Virtual Server rule: “
TCP
”, “
UDP
” or “
Both
”.
Note:
If you do not know which protocol you need for your Virtual Server Rule, select “
Both
”. This
option will pass both TCP and UDP traffic to the configured IP Address of your computer/server.
I.
Enter the desired Port of your computer/server which needs the Virtual Server rule.
J.
Enter the port which must be visible on the outside of your internet connection.
K.
Click “
Apply
” to apply the created Virtual Server rule.
When the Virtual Server rule is saved, it will be shown in the “
Virtual Server List
”.
To create more Virtual Server rules, repeat step
E
-
K.
The defined Virtual Server rules are ready to use!
