Concept2 ZN8050, Инструкция по эксплуатации

Страница: 35 / 48

EN
33 ZN8050, ZN8060
SPRAYING
Push the spray button; water is released through the spray nozzle. You will need a sufficient volume of water in the
tank to activate this function.
Steam ironing
1. For steam ironing set the steam volume regulator to the minimum, and the temperature controller according to
the material „...“, „...“ or „MAX“
2. After the heating indicator goes off, set the steam volume regulator to the required position, the steam will start
to release, and you may begin ironing.
Steam shock
Turn the temperature controller to the position „…“ or „MAX“, and push the steam button – the ironing surface will
emit steam. Wait for a couple of seconds before the next push.
You may use this function for ironing in a vertical position to smoothen folds on hanging clothes or curtains. Hold the
unit several centimeters from the fabric to prevent damage to soft materials.
Never iron any clothing on the body!
Ironing
1. If you want to use the spray or steam function, fill the tank with water (see Filling with Water).
2. Set the temperature controller to the minimum.
3. Insert the plug into the mains outlet.
4. Set the temperature controller to the value that corresponds to the material to be ironed (according to the
international textile codes). The heating indicator will be illuminated.
Note: Iron fabrics that require a lower temperature first, then those at higher temperatures. Most fabrics are
ma rked according to international codes – see the table below.
5. Wait until the heating indicator stops shining. Only then has the ironing surface reached the right temperature. The
ironing surface will be heated during ironing. The heating indicator will turn on and off.
6. After use, set the temperature controller to the minimum, unplug the unit from the power source, and let it cool
down. Then pour the remaining water out of the tank.
Anti-dripping function (ANTI-DRIP)
This unit is equipped with a function that prevents water from dripping, i.e. it will automatically stop steaming if the
temperature is too low and water could be dripping from the ironing surface.
Tag with ironing info Fabric type Temperature setting Steam setting
Synthetic
Polypropylene
Polyurethane
Polyamide
Polyester
Viscose
Silk
Wool
Cotton
Linen
Note:
The symbol on the tag means:
“This fabric must not be ironed!”
MIN.
MAX.
(MAX steam)
DRY
STEAM