Concept2 VP9410, Инструкция по эксплуатации

Страница: 29 / 40

27 VP9410
EN
ACCESSORIES
1. Slotted nozzle with a brush
The slot nozzle adapter is used for vacuuming places that are difficult to access, such as radiators, slots, corners,
pedestals, spaces between upholstery, and others.
2. Upholstery nozzle
This upholstery nozzle attachment may be used for smaller upholstered areas.
USING THE APPLIANCE
NOTE
Before using the appliance, make sure that filters and the dust collection bag are properly positioned and mounted.
Unwind the supply cable length you need. The yellow mark on the supply cable indicates the optimum cable length. Do
not unwind the supply cable beyond the red mark!
1. Insert the plug into the electric voltage socket.
2. Press the ON/OFF switch to start the appliance.
3. Set the suction power you need by using the power controller.
4. After you have stopped vacuuming, switch off the appliance and disconnect it from the electrical socket.
5. To wind the supply cable, press the winding button with one hand and hold the supply cable with the other hand to
prevent uncontrolled whipping back and forth.
OPERATING MANUAL – ASSEMBLY OF THE VACUUM CLEANER
NOTE
Always disconnect the plug from the mains outlet prior to mounting or removing accessories!
1. Connecting the flexible hose to the appliance
Insert the flexible hose into the appliance‘s air suction inlet.
Push until your hear a clicking sound indicating the right position has been
reached.
For removing the flexible hose, press both stopper buttons and remove the hose.
The suction power may be controlled manually on the hose handle.
When the slide throttle is closed, the air flow is stronger.
When the slide throttle is open, the air flow is weaker.
2. Attaching the telescopic tube to the hose adapter
Put the telescopic tube on the hose adapter and turn it slightly.
3. Extending the telescopic tube
Press the plastic latch and pull the smaller tube outwards.
4. Fixing the floor attachment to the telescopic tube
Insert the telescopic tube into the floor attachment and turn it slightly.
The clapper (Fig. 1) is used for setting the floor attachment to brushing (for flat
floors), or to smooth vacuum cleaning (for carpets).
Fig. 1