EN
33
RM3230
3. Carefully fit the attachable blade (10) in the holder (8), insert it in the working bowl and fit on the drive centre
shaft (6).
4. Fit the working bowl lid (20) and turn it a little until it clicks into place.
5. Get the food to be grated or sliced ready.
6. Connect the feed cord into the socket.
7. Switch the motor on and set the speed in position 4 – 6.
8. Insert food in the lid opening and use the pusher (21) to push the food in. Always use the pusher to avoid finger
injury.
9. When you finish grating (slicing), set the switch in the OFF position and disconnect the cord from the socket.
10. Open the lid and empty the working bowl.
11. Wash the attachments and let them dry properly.
• Do not overfill the working bowl. You should process a maximum of 1.5 kg of food in one go.
• Keep the attachable blades in the motor part storage space.
TYPES OF ATTACHABLE BLADES AND RECOMMENDED FOOD
Blade type
Recommended food
A Fine grating
lettuce, carrots, apples
B Gross grating
cucumbers, carrots, cabbage
C Thick slices (cabbage, carrots, onions)
cabbage, carrots, onions
D Thin slices (cabbage, carrots, onions)
E Potato pancakes extension
potatoes
F French fries
potatoes
CITRUS JUICER
WARNING!
Prior to fitting the attachments, make sure the appliance switch (3) is in the OFF position and that the feed
cord is disconnected from the socket.
1. Make sure the safety lid (1) is correctly fitted.
2. Fit the working bowl (13) on the motor part (5).
3. Fit the citrus juicer filter (16) on the working bowl and turn it a little until it clicks into place.
4. Fit the citrus juices cone (17) on the shaft.
5. Get the fruits to be juiced ready.
6. Connect the feed cord into the socket.
7. Switch the motor on and set the speed in position 1. Do not apply higher speeds.
8. Push halves of the fruits against the rotating cone.
9. When you finish juicing the fruits, set the switch in the OFF position and disconnect the cord from the socket.
10. Open and empty the working bowl.
11. Wash the attachments and let them dry properly.
• Only use the speed controller in position 1 for juicing. Do not apply higher speeds to avoid splashing of juice
and injury from the rotating cone.
