76
EN
PDV7575bc
USER MANUAL
Before first use
Before putting a new appliance into operation, you should wipe it with a damp cloth for hygienic reasons.
Carefully assemble all burners according to Fig. 1a and Fig. 1b , so that all parts fit properly and the flame
is uniform.
1.
Burner cover
2.
WOK burner cover
– internal
3.
WOK burner cover
– external
4.
Flame spreader
5.
Burner body
1. Place the flame spreader (4) on the burner body (5) so that the ignition electrode and the thermoelectric
cell extend through their respective holes in the flame spreader (4).
2. Place the burner cover (1), the WOK covers of the burner (2) and (3), on the flame spreader (4).
Ignition of a burner
Each burner is fitted with a safety device designed to stop the gas supply if the flame goes out.
The symbol next to each burner knob indicates which burner it operates.
1. Press and turn the respective burner knob counter-clockwise to the maximum position (MAX).
2. Automatic ignition of the burner occurs only if you hold the burner knob in the maximum position.
3. After igniting the burner, hold the pressed burner knob for about 15 seconds. Release the pressed knob.
4. After releasing the pressed burner knob, adjust the flame by turning the knob to the desired position. The
operating position must be selected between the maximum (MAX) and minimum (MIN) position.
5. To switch off the burner, turn the knob clockwise to the OFF position.
Fig.1a
Fig. 1b
1
2
3
4
5
4
5