![Concept2 MNV5660 Скачать руководство пользователя страница 148](http://html.mh-extra.com/html/concept2/mnv5660/mnv5660_manual_2650212148.webp)
148
MNV5660
EN
Note:
1. 1. In the upper part of the illustration for the installation of the top plate it is shown how many spacer bars and
which screws must be used for installing the spacer bars to the control panel of the dishwasher.
2. The spacer bars are put together; the side without the „pins“ shall be attached to the bottom side of the
dishwasher control panel.
3. The „pins“ on the bottom side of the bars must be removed (cut off). This step must be done otherwise the top
plate would not fit properly.
4. After removing the „pins“, attach the spacer bars with the included screws to the bottom side of the dishwasher
control panel.
5. In the upper part of the illustration for the installation of the top plate it is shown which screws must be used for
the number of spacer bars.
6. After attaching the spacer bars to the bottom side of the dishwasher control panel, the head of the screw must
be at the same level (it must not stick out) as the bottom side of the spacer bar.
Adjusting door spring strength
• The spring strength is preset only for the appliance door itself. After attaching the cover plate the weight of the
door changes.
• You adjust the strength of the springs using the screws located on the bottom part of the front of the dishwasher
(Pic. 16).
• Setting of the springs is correct when the open door stays in the position and does not fall down.
Pic. 16
Pic. 15a
Pic. 15b
Unscrewing the short screws
Screwing the long
screws
Содержание MNV5660
Страница 2: ...2 MNV5660 CZ ...