Concept2 MNV4545, Руководство пользователя

Страница: 99 / 112

Problém Příčina Řešení
The dishes aren’t dry. The rinse aid container is empty.
Make sure the rinse aid container is
fi lled.
The dishes and cutlery aren’t clean.
Wrong program. Select a more eff ective program.
Incorrectly loaded dishwasher.
Make sure the operation of the rinse
aid container and spray arms is not
blocked by incorrectly loaded dishes.
Stains and fi lm on glasses and cutlery.
Extremely hard water, low water
temperature, overloaded dishwasher,
incorrectly loaded dishwasher, old or
wet dishwasher detergent, empty rinse
aid container, wrong dosage of the
dishwasher detergent.
Take out metal dishes, do not add
dishwasher detergent, select the long-
est program, run the dishwasher for
18 – 20 minutes, during main washing
open the door, pour 2 cups of vinegar
on the bottom, close the door, and
let the dishwasher fi nish the washing
cycle. If the vinegar does not work,
repeat the whole procedure and add ¼
cup of citric acid.
Stains on glass.
Combination of soft water and too
much dishwasher detergent.
Use less dishwasher detergent in case
of soft water, and select the shortest
washing cycle for washing glass.
Yellow or brown fi lm on the internal
surface. Ferrous sediments in the water
can cause this fi lm.
Contact a company specializing in
water treatment and ask for a suitable
fi lter.
White fi lm on the internal surface. Mineral sediments from hard water.
Use a wet sponge with detergent; put
rubber gloves on. Never use any other
cleaning agents than those designed
for dishwashers.
Slight steam leakage. Normal phenomenon.
It is common for steam to leak through
the door lock
Black or gray stains on the dishes.
Aluminum cutlery was touching the
dishes during washing.
Use a soft abrasive to clean the
stains. Do not use this agent in the
dishwasher!
Water remains in the washing zone. Normal phenomenon.
A small volume of water around the
drain holes on the bottom keeps the
sealing lubricated.
The dishwasher is leaking.
The dishwasher detergent or rinse aid
container is overfl owing, or the dish-
washer is not in a horizontal position. The dishwasher detergent or rinse aid
container is overfl owing, or the dish-
washer is not in a horizontal position.
“E1” symbol is displayed.
The dishwasher has been pumping
water for a long time.
Check the water supply.
“E4” symbol is displayed. The dishwasher is over
Too much water supplied. Check the
supply water pressure.
97 MNV4545
EN