79
MNV3960
EN
If you need to change the selected program
If the program has not been launched yet, select another program or push the main switch button (1) – the dishwasher
will be turned off and the preset program erased from the memory.
b) If the program is already running, push the main switch button (1) – the dishwasher will be turned off and the
preset program erased from the memory.
Note:
If you decide to change the selected program, check to see if there is any dishwasher detergent in the container,
or if it has been used and more should be added before launching a new program.
If you need to add dishes to the dishwasher when program is running
1. Open the dishwasher door slightly; the running program will stop. Wait until the spray arms stop moving.
2. Add the dishes to the dishwasher and close the door. The program will resume after a couple of seconds.
WARNING!
Proceed with caution when adding dishes. A large volume of steam may be released, or hot water may splash out
when you open the door. Hot water with dishwasher detergent can be chemically aggressive in contact with skin or
furniture.
MAINTENANCE AND CLEANING
By regular checking and maintenance you may prevent defects before they
occur. Therefore, you should inspect the dishwasher carefully from time to time.
To keep the interior in perfect condition, we recommend using a special
dishwasher cleaner once every 4 - 6 months (e.g. Calgonit).
Overall condition
• Check the washing zone for sediments of fat and limescale. If there are
sediments, fill the dishwasher detergent container and run the program at
the highest temperature.
• Wipe the door sealing regularly with a wet cloth to remove sediments.
• Check the salt level indicator; add salt if needed.
• Check the rinse aid indicator. Add rinse aid if needed.
Discharge filters
The discharge filters protect the pump against large particles from washing
water. These particles
can clog the filters. The filtering system (Fig. 1) consists of the main filter (1),
rough filter (2) and soft filter (3).
Check the condition of the filters after each washing.
You can remove the filter system after unscrewing the rough filter drum. Remove
sediments and clean the filters under running water. Follow the reverse steps to
reinstall the filters.
Never use the dishwasher without a properly installed filter system!
Fig. 14
