89
MNV2045, 2060
EN
7. Stick condensation strip on the lower edge of the worktop (supplied) to reduce the humidity permeating the
worktop (Fig. 24).
8. Connect the dishwasher to the electric power network.
9. Put the dishwasher in the selected place.
10. Adjust the dishwasher to a horizontal position using the feet. Adjust the height of the front feet with a wrench,
adjust the height of the rear feet with a screwdriver (Fig. 25). Check the horizontal position using a level.
Removal
If you are dismantling the dishwasher, it is important to proceed
correctly:
1. Disconnect the dishwasher from the electrical network first (pull out the plug).
2. Close the water supply.
3. Release the supply and discharge hoses.
4. Release the screws under the worktop.
5. If there is a plate base under the dishwasher, disassemble it.
6. Remove the dishwasher carefully, and the supply and discharge hoses with it.
Fig. 27
Fig. 26
11. Fix the dishwasher against shifting. You can use two methods.
a) Put screws through the holes on the outer edge and fix them to the side of the cupboard (Fig. 26).
b) In the case of a wooden worktop put the screws through the holes in the upper side and fix them to the
worktop (Fig. 27).
Fig. 25
Fig. 24
