Concept2 LS4055wh, Руководство пользователя

Страница: 70 / 76

70
EN
LS4055wh
CHANGING THE DOOR SWING DIRECTION
1. Switch off the circuit breaker or remove the plug from the wall outlet. When disconnecting the unit from the
wall outlet, never pull the power cord, grasp the plug end and disconnect it by removing it from the receptacle.
2. If you have any food and drinks in the refrigerator door compartments, remove them.
3. Remove the hinge covers, then remove the screws from the top hinge of the refrigerators door using a Phillips
screwdriver (Fig. 2) and remove the top hinge. Throughout dismantling hold the door in a vertical position to
prevent them from falling and damaging. Remove the refrigerators door and place it in a safe place.
4. Move the top hinge of the door, top door spacer and door bearing housing to the other side (Fig. 3).
5. Using a Phillips screwdriver, remove the screws that secure the lower hinge (Fig. 3).
Note: the tilt angle of the refrigerator must be less than 45 °.
Fig.3
Fig. 2
Blind
Upper hinge
Upper hinge cover
Adjustable
foot
Bottom
hinge
Stopper