Concept2 LA8983ss, Руководство пользователя

Страница: 40 / 46

40
LA8983ss
EN
Super Cool Function
•
The super cool function automatically sets the temperature of the refrigerator zone to 2 ° C.
• Turn off the function to return the set temperature values.
Super Freeze Function
• The super freeze function automatically sets the temperature of the refrigerator zone to -24 ° C.
•
The super freeze function lasts for 48 hours as default.
• Press and hold the sensor "C" for 5 seconds to set the period to 6 hours.
• The display will show "6" instead of "48".
• When the function turns of automatically to temperature will return to set values.
Vacation Function
• The Vacation function automatically sets the freezer to -16 °C and switches off the refrigerator.
Tips for use
• Each time you open the appliance door, a warm air gets inside. That creates an under pressure inside the appliance.
It may take a few moments before the pressure gets equalised and it will be possible to open the door easily.
•
We do not recommend putting hot food or fluids that are still evaporating inside the appliance. It will increase the
humidity inside the refrigerator.
• Food intended for refrigerating should be wrapped or covered. It is recommended to use plastic bags, kitchen foil
or food paper. Liquids should be stored in closed containers or bottles.
REGULAR OPERATING NOISE
Ice crackling
It can be caused by expanding and shrinking of the items inside the refrigerator and freezer.
Short cracking
It can be heard when the thermostat turns on and off the compressor.
Noise of the compressor
Running compressor produces noise. After the installation of the appliance, the compressor may be a little
louder for a short time.
Bubbling and flowing
This sound is generated when the refrigerant is flowing through the appliance pipes.
Sound of running water
Water flows into the evaporator groove during the defrosting process and it is audible throughout the
defrosting process.
Connection to the mains
• Be sure that the voltage and current match the values on the appliance rating plate. We recommend using
a separate outlet with a 16 A circuit breaker.
• Only use grounded sockets.
• Do not use multiple sockets, plugs and extension cords. There is a risk of overheating.
•
The plug of the power cord on the appliance must be freely accessible even after the installation.
• Changes in a connection may only be performed by a qualified professional.
• Electrical safety of the appliance can be guaranteed only if the protective terminal of the appliance is connected to
the protective conductor of the mains.
• The manufacturer bears no responsibility for damage to persons or property as a result of missing or bad protective
connection.
• The power cord must be positioned in a way it does not come into contact with hot parts of the appliance and it is
not being deformed or excessively bent.