OPERATING INSTRUCTIONS
Before the first use
Prior to using a new unit, wipe the inside with a wet cloth for hygienic reasons. Wash all the removable parts
in warm water with a detergent, or in a dishwasher.
Then, heat the unit without food at maximum temperature (250°C) for 30 minutes. You can find the infor-
mation related to the temperature and heating time adjustment in the paragraph Appliance Fundamental
Functions (page 74). The unit may emit a slight smell and smoke, which should disappear after a while. Air the
room well during this process.
After the appliance has cooled down, wash all smooth surfaces and doors with soap and water and dry them.
Then install the side grates (see Accessories).
Daytime setting
1. After connecting the appliance to the mains, the symbol 0:00 will appear on the display.
2. Press button (7) to activate the mode of setting the time of day (the hour position starts blinking).
3. Use the slider for continuous adjustment of time and temperature (6) or the plus and minus buttons to
set the time in hours (in the range 0 to 23).
4. Upon pressing button (7) the numbers start blinking.
5. Use the slider for continuous adjustment of time and temperature (6) or the plus and minus buttons to
set the time in minutes (in the range 0 to 59).
6. Press button (7) to end the setting of the time of day.
This activates the time and it is shown on the display.
Daytime setting change
1. Press the timer setting button (7) in the standby mode. It will activate the daytime setting (clock digit will
start blinking).
2. Use the slider for continuous adjustment of time and temperature (6) or the plus and minus buttons to
set the time in hours (in the range 0 to 23).
3. Upon pressing button (7) the numbers start blinking.
4. Use the slider for continuous adjustment of time and temperature (6) or the plus and minus buttons to
set the time in minutes (in the range 0 to 59).
5. Press button (7) to end the setting of the time of day.
This activates the time and it is shown on the display.
Note:
If the time is not set, the appliance will not operate even though it is connected to the power supply.
Appliance Basic Functions
1. Place the pan with the food in the selected position.
2. Press the function selection button (5) to confirm the requested cooking function.
3. Use the slider for continuous adjustment of time and temperature (6) or the plus and minus buttons to
set the temperature.
4. Press the Start/Pause button (10) to confirm the start of baking.
5. You can exit the selected program at any time during the baking process by pressing the button (1).
Note:
For this basic function, it is not necessary to have the time of day set.
75
EN
ETV8760ds
Содержание ETV8760ds
Страница 2: ......