2. If the appliance is in standby mode and if no action is taken within 10 minutes, the display goes off and
the energy-saving function is set automatically.
3. To cancel the energy-saving function, press any button, or turn any of the selectors (K1 or K2).
Segments on the display
The set baking time is calculated in the form of individual segments, which gradually go off according to the
elapsed time.
Note:
1. After setting the time and temperature of the selected baking program, the display shows 10 segments.
2. These segments gradually go off according to the elapsed baking time.
E.g.
Set time 0:01
– each segment is equal to 6 seconds
Set time 0:02
– each segment is equal to 12 seconds, etc.
Notes
1. The light comes on upon activation of any baking function.
2. To set a function other than the current baking function, the active baking function must be cancelled by
pressing button (3)
twice
.
3. If the baking function is set and button (4) is not pressed within 5 minutes after setting the program, the
time of day appears on the display. The setting for the selected program shall be deleted.
4. Upon pressing any button, or turning one of the selectors, an audible signal is emitted.
5. At the end of the selected baking function, a five-fold audio signal is emitted.
6. At the end of the reminder function, a ten-fold audio signal is emitted.
Soft closing doors
1. If the appliance door is open at an angle >30°, the door is still at
any position.
2. If the appliance door is open at an angle ≤30°, the door closes
slowly by means of the damper.
Caution:
Do not close the appliance door too quickly, it could cause
damage to the appliance
EN
76
ETV7260
Содержание ETV7260
Страница 2: ......
