Concept2 CP 2000, Инструкция по эксплуатации

Страница: 31 / 33

Round Brush - Use it for stubborn grease and dirt deposits.
Wire Brush - Use it on oven grills and racks.
Angled Nozzle (45°) - Use it on hard to reach areas such as taps etc. Scrapper -
ldeal for dried residue in ovens or for defrosting freezers.
CLEANING AND MAINTENANCE
IMPORTANT: ALWAYS ENSURE THE CLEANER HAS FULLY COOLED DOWN BEFORE PERFORMING ANY
MAINTENANCE TASKS.
Empty the Water Tank
1. Disconnect the cleaner from the mains and ensure the appliance has
cooled down.
2. Release the Water Tank from the main body of the cleaner (3). 3.
Remove the Water Tank cap.
4. Pour out any excess water from the tank (16). Put the cap back and secure it.
Changing and washing the Textile Pad
1. Disconnect the cleaner from the mains and ensure the appliance has cooled down.
2. Remove the Carpet Glider first if necessary and then remove the Textile Pad from the Head (18).
3. Wash the Textile Pad in a washing machine with a mild detergent at maximum temperature of 40 °C.
IMPORTANT: Do not use bleach or fabric softener when washing the Textile Pad.
Changing the Water Filter
The cleaner is fitted with a water filter. lf you live in an area with hard water the filter will discolour over time.
Depending on the water hardness and frequency of use the filter should be changed every 6 months.
1. Disconnect the cleaner from the mains and ensure the appliance has cooled down.
2. Release the Water Tank from the main body of the cleaner (3).
3. Remove the Water Filter from the appliance (19). Replace the old filter with a new one.