Concept Pro VXM4-4, Руководство пользователя

Страница: 43 / 48

40
APPENDIX B: CONFIGURING A NETGEAR DG834
APPENDIX B: CONFIGURING A NETGEAR DG834
ROUTER FOR USE WITH THE VXM4
ROUTER FOR USE WITH THE VXM4
SETTING UP PORT FORWARDING
This section assumes that you have already established a successful connection locally. Logon to the DG834 and select ‘Services’ from the menu.
Click ‘Add Custom Service’ and enter the following values:
Name: VXM4 (or any other name of your choice)
Type: TCP
Start Port: 6100
Finish port: 6100
And click ‘Apply’
Then, create a firewall rule as follows:
Select ‘Firewall Rules’ from the menu. Under the inbound services, click ‘Add’ and enter the following:
Service: VXM4(TCP:6100) – This is the service you created earlier
Action: Leave at ‘ALLOW always’
Send to LAN server: 192.168.0.3 - This is the IP address of the VXM4
Wan Users and Log settings can be left unchanged.
And click ‘apply’ to add the new rule
Once the firewall rule is setup, anybody should be able to access the VXM4 from the outside world, as long as they are using the correct software.
To configure the software, the IP address is the public static IP address of your router and the port number in this case will be 6100. The username
and password must match those set up on the VXM4
SETTING UP MULTIPLE VXM4s ON ONE ROUTER
The setup steps in this case are identical but you will need to create a separate service and firewall rule for each VXM4 connected. Note also that
each VXM4 must have a unique port setting as well as a unique IP address.
Example – 2 VXM4s connected to a router
1st VXM4 settings
IP address: 192.168.0.3
Port: 6100
Gateway: 192.168.0.1
On the DG834, configure a service on port 6100 and a firewall rule to direct this service to 192.168.0.3
2nd VXM4 settings:
IP address: 192.168.0.4
Port: 6101
Gateway: 192.168.0.1
On the DG834, configure a service on port 6101 and a firewall rule to direct this service to 192.168.0.4
The remote client software can then be configured with one connection group containing two VXM4 connections to match the above and then both
VXM4s can be accessed remotely at the same time.
Note: If connecting locally over a LAN, the unique 192.168.0.XXX IP address for each VXM4 has to be entered. If connecting over broadband, the
same public IP address is entered for both VXM4s – port forwarding on the router takes care of the rest.