Concept Pro AIR3526-IP2M, Быстрый старт

Страница: 2 / 8

IP CAMERA QUICK START GUIDE
1. CONTENTS
Packaging Contents
Technical Documents IP Camera x1 Quick Start Guide x1
Fitting Screws x3 Wall Plugs x3
Sunshield x1 Sunshield Bolt x1
Mounting Template x1 Allen Key x1
RJ45 Waterproofing Cap x1 Terminal Blocks x2
(except AIR3526-IP2M & AIR3526-IP4M)
2. INSTALLATION
Important: Ensure all precautionary procedures are observed during installation.
It is recommended that the camera is tested in low light and day light conditions
at the point on installation to ensure continuity of effective CCTV monitoring.
1. Open Packaging
Open packaging, remove camera, and set aside the
included accessories. Locate the cable cutout on the
side desired.
2. Drill Mounting Holes
Attach the included mounting template on the
mounting surface and drill holes according to the
template. Insert included wall plugs into the holes.
3. Mount the Camera
Insert cables through the mounting hole.
Position the camera over the mounting holes and use
the included fitting screws to affix the camera to the
mounting surface.
4. Adjust Camera Positioning
Loosen locking screws and axes to move the camera
to the desired monitoring angle. Re-tighten after the
desired angle is found.
2
3
4
1