15
WHEN THE CALLER’S PHONE NUMBER HAS A DIFFERENT
AREA CODE FROM THE PRESET:
The long distance dialing digit ‘1’ will be inserted automatically
during Caller ID memory call back.
Press [CALL BACK], 11 digits number will blink. Press [CALL
BACK] again to confirm to dial the 11 digits number.
WHEN THE CALLER’S PHONE NUMBER HAS THE SAME
AREA CODE AS THE PRESET:
The long distance dialing digit ‘1’ and the 3 digits area code will be
deleted automatically during Caller ID memory call back.
Press [CALL BACK], 7 digits number will blink. Press [CALL BACK]
again to confirm to dial the 7 digits number.
NOTE:
Your telephone company may require a different format for
making out-of -area (toll) calls WITHIN your area code. See the next
section for the procedure to obtain the applicable tollcall format for
your phone company.
WHEN YOUR TELEPHONE COMPANY REQUIRES YOU TO DIAL
OTHER THAN A 7-DIGIT NUMBER (SAME AREA CODE) OR 11-DIGIT
NUMBER (DIFFERENT AREA CODE) TO MAKE TOLL CALLS WITHIN
YOUR AREA CODE, FOLLOW ONE OF THE 4 OPTIONS BELOW FOR
CALLER ID CALL BACK.
Option 1
1+Area Code+7-Digit Number (11 digits)
Option 2
1+7-Digit Number (8 digits)
Option 3
Area Code+7-Digit Number (10 digits)
Option 4
7-Digit Number Only.
ERASE THE CALLER ID MEMORY
ERASE A SINGLE CALL IN CALLER ID MEMORY
Press [
¶
] or [
¿
] for the Caller ID memory location to be reviewed. To
clear a single Caller ID memory location, press [ERASE] twice
quickly.
The data for that call will be erased, and the CALL# and Caller ID
information will be updated.
ERASE ALL CALLS IN CALLER ID MEMORY
After all new message being reviewed, press and hold [ERASE] for
3 seconds. The message ‘ERASE ALL CALLS’ will appear to
confirm your action. Press [ERASE] to clear all the information, then
the message ‘NO CALLS’ appear.
Both the total call and new call counters will become zero, and the
current time and date will be displayed.
NOTE:
All new calls must be reviewed before clearing the entire
memory.
CALL BACK (REDIAL) FROM THE CALLER ID MEMORY
With the handset hung up on the base press [
¶
] or [
¿
] to find the
Caller ID memory location to be redialed.
Press [CALL BACK] twice to redial, the LCD shows ‘PICK UP
CALL’.
Pick up the handset to make your phone call.
With the handset off hook, press [
¶
] or [
¿
] to find the Caller ID
memory location to be redialed. Press [CALL BACK] twice, the
number will then be dialed automatically.
14
13
If the name and number are not
available, the LCD will show
‘-UNAVAILABLE-’ with the call’s time and
date. The ‘NEW’ icon turns on and New
Call LED blinks.
If no key is pressed within 20 seconds,
the LCD will show the ‘Answer-Ready’
mode, and display the total call counter,
new call counter, current time and date.
VIEW THE CALLER ID MEMORY
If you have new calls (‘NEW’ icon and New Call LED is lit).
Press [
¶
] or [
¿
] to read all of the most recent calls. The NEW
CALL# will decrease.
Once all the new calls have been read, ‘END OF NEW CALL’ will be
displayed.
Press [
¶
] to view the oldest calls, or press [
¿
] to view the most
recent calls.
NOTE:
After you view all the calls in memory, the LCD will show
‘END OF LIST’.
NOTES:
1. The New Call LED will blink until all the new Caller ID data has
been reviewed.
2. If the ‘RPT’ icon is turned on, you have received multiple NEW
calls from the same number.
3. If you receive a call from a number stored in (previously
reviewed) memory, the data in memory will be replaced with the
new call’s time and date and the ‘NEW’ icon will be turned on.
If no key is pressed within 20 seconds, the LCD will show the
‘Answer-Ready’ mode, and display the total call counter, new call
counter, current time and date.
Содержание FX3000
Страница 9: ......