Before Using Scale
Precautions for Use
CAUTION! Use of this device by persons with any electrical implant such
as a heart pacemaker, or by pregnant women, is not recommended.
Please consult your physician should you have any questions about the use of this
product in relation to any condition you may have, or treatment you may be receiving.
1. Remove all packaging materials.
2. Remove the isolator tab from the battery compartment – without opening the
battery cover at the bottom of the scale, gently pull out the isolator tab.
(In case the tab cannot be pulled out, remove the screws from the battery cover
and remove the cover. Gently pull out the isolator tab. Ensure the battery is
installed correctly. Replace the battery cover and tighten the screws again).
3. For best accuracy, place scale on tile or hardwood floor, rather than uneven,
flexible or soft flooring (such as carpet).
4. Tap the scale quickly and sharply with your foot to turn it on. The display will
light up.
5. Wait until all digits light for several seconds and “0.0” appears.
6. When scale display is on, set switch on the base of the scale for measuring in
pounds (lb) and kilograms (kg).
Using the Weight Only Mode
Instructions for customizing your Weight Watchers Body Analysis scale are below.
However, the scale does not need to be programmed to operate as a simple
weigh scale.
1. Tap the scale quickly and sharply with your foot to turn it on. The display will
light up.
2. Wait until all digits light for several seconds and “0.0” appears.
3. Step on the scale and stand still to measure your weight.
4. The weight reading stays lit for several seconds. Then the scale will shut
off automatically.
