• The cutting lengths are displayed on the LED
screen in ‘‘mm’’ – scroll through the
available length settings with the digital
touch controls. There are 24 length settings
available: 0.4mm-5.0mm in 0.2mm
increments
• Select your required length – the length
setting will then remain displayed on the
LED screen.
• Press the power button to switch the super
stubble on.
MEMORY FUNCTION
This stubble trimmer has a memory function
that stores the last chosen length setting. When
the unit is switched off the comb guide returns
to 0.4mm position. When the trimmer is
switched back on the comb guide automatically
moves up to the last chosen length setting.
TRAVEL LOCK FEATURE
The Conair For Men Super Stubble has a travel
lock feature which will lock all buttons from
activating accidently.
• To activate the travel lock, press and hold
the I/O button for 2 seconds until the time
display counts downs from 5 to 1. When the
countdown reaches 1, the lock signal is
shown.
• To de-activate the travel lock press and hold
the I/O button for 2 seconds until the time
display starts to count down from 5 to 1 and
the motor switches on and starts running.
The travel lock is now de-activated.
• When you place the unit in the charger, the
travel lock is automatically deactivated.
USING THE TRIMMER WITHOUT
THE COMB GUIDE
Using without the comb guide is ideal for
detailing/shaping and general tidying of edges.
• To detach the comb guide, gently hold the
trimmer in one hand and with your thumb
and index finger push up on each side of the
comb guide (fig. 1). Flip the comb guide to
the back of the unit, gently pull down and
secure under the latch to lock into place
(fig. 2). To release the comb guide, pull down
and move away from the latch (fig. 3).
• Switch the super stubble on by pressing the
‘‘power on’’ button. The LED will illuminate
and the blades will start to move.
• If you are looking for an ultra-close finish,
you can use the trimmer without the comb
guide. This will give you an extremely short
cut.
IMPORTANT:
please note when using the
trimmer without the comb guide, the cutting
length will be below 0.4mm. The length setting
shown on the LED screen will no longer be
relevant when the comb guide is detached.
SUPER STUBBLER
TM
TOP TIPS
• Use on clean, dry hair.
• If possible, when using for the first time, try
and grow your facial hair for a few days
before cutting so you can trim down to a
level that is best for you.
• Set the cutting length as required.
• It is always best to start cutting with a longer
length first, then trim again if the length is
longer than desired.
• Hold the super stubble against the hair, the
teeth of the comb guide should be pointing
upwards and should be flat against the face.
• Move the trimmer upwards through the hair,
a little at a time, against the direction of hair
growth. The floating and contouring head
will follow the curves of your face to ensure
both accuracy and comfort.
• The super stubble will work most effectively
when cutting through the hair at its own
speed – never force through the hair. You
may experience a little resistance when
trimming the neck area, where hair is thicker
and grows in many different directions. This
is completely normal.
• Just like shaving, extra time should be given
when trimming under the neck area, as
again this is where hairs grow in many
different directions.
• Never switch the trimmer off whilst in the
hair.
CLEANING & MAINTENANCE
• Regular cleaning will maintain the high
performance of your super stubble.
• Switch off and remove the power cord if
connected.
• Detach the comb guide by gently lifting the
front of the comb guide from both sides and
;44+
flipping it over to the back of the unit and
locking it into position by clicking it securely
onto the fastener on the back of the handle.
• Use the cleaning brush supplied to brush
away any hair and debris. Do not use a
sharp object to clean the trimmer blade.
• The blades can be removed to aid cleaning.
• To remove the blades hold the handle of the
i-stubble with one hand, place your thumb
underneath the blades and push the blades
away from the handle.
• Gently blow away any hair trapped beneath
the blades.
• The blades can be rinsed under the tap.
After rinsing the blades they may need to be
oiled. See oiling instructions below.
• Before re-attaching blade
to the trimmer, ensure
the blades are dry and
moving blade is in the
centre. Please refer to
fig. 4.
• Please do not use any
chemical liquids when
cleaning the trimmer.
• Ensure you clean the blades after each use
and before storing away.
• It is highly recommended to oil the blades
from time to time with the oil provided. This
ensures optimum cutting performance. For
the first use you will need to use the oil
supplied with the product, unscrew the cap
and cut off the very end of the plastic tube
with a pair of scissors to release the oil. To
oil the blades ensure the unit is switched on.
Gently squeeze the oil tube and apply 2
LIMITED THREE YEAR WARRANTY
Conair will repair or replace (at our option) your unit
free of charge for 36 months from the date of pur-
chase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defec-
tive product to the service centre listed below that is
nearest you, together with your purchase receipt and
$7.50 for postage and handling. In the absence of
a purchase receipt, the warranty period shall be 36
months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR
LIABILITIES, INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE
LIMITED IN DURATION TO THE 36 MONTH DURATION OF
THIS WRITTEN, LIMITED WARRANTY.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
FOR BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER.
This warranty gives you specific legal rights, and you
may also have other rights, which vary from province
to province.
Model GMT1000C
Instruction Booklet
Have a Question?
Please do not return this product to the retailer.
Call Us First!
Our customer service and product experts are
ready to answer ALL your questions.
Please call our TOLL-FREE customer service
number at: 1-855-926-6247
or visit us online at
www.conaircanada.ca
SERVICE CENTRE:
CONAIR CONSUMER PRODUCTS ULC
100 Conair Parkway
Woodbridge Ontario, L4H OL2
©2014 CONAIR CONSUMER PRODUCTS ULC
For more information on any Conair product call:
1-855-926-6247 (1 8559 CONAIR)
Visit our Web site: www.conaircanada.ca
Consumer Call Centre E-mail:
[email protected]
Printed in China
14CN146392
drops of oil onto the blades. Leave the unit
on for a further few seconds to allow the oil
to thoroughly spread the length of the
blades. Switch off the unit and remove any
excess oil by gently dabbing with a cloth.
BATTERY DISPOSAL
This appliance contains a lithium ion battery. To
protect the environment, this appliance and its
battery must be disposed of safely. At the end
of its life, please take this appliance to a
recycling center, where the internal recharge-
able battery should be removed by a profes-
sional and recycled separately. For more
information about the recycling of electrical
and battery-operated appliances, please
contact your local recycling or environmental
protection office or your household waste
disposal service. For specific enquiries
regarding the replacement of batteries in this
product, please contact our Conair Customer
Care Line.
CONTAINS LITHIUM ION
BATTERY. MUST BE COLLECTED,
RECYCLED OR DISPOSED OF
PROPERLY. DO NOT DISPOSE
OF IN THE MUNICIPAL WASTE.
SUPER
STUBBLER
TM
S
S
S
U
U
U
U
U
U
P
P
P
P
P
P
P
E
E
E
E
E
E
E
R
R
R
R
R
R
R
S
S
S
S
T
T
U
U
U
B
B
B
B
B
B
B
B
L
L
L
E
E
R
TM
L I T H I U M I O N S E R I E S
PULL
fig. 1
fig. 2
fig. 3
fig. 4
RE
CY
CLE
/ RECYC
LÉ
E
L i ION