InstructIon Manual &
Warranty InforMatIon
Before you operate this product, please read these instructions. Keep this
manual in a safe place for future reference.
Please read all safety guidelines before using your
solarise light therapy
Our products are not listed as medical devices. If you suffer from serious
depression, please consult your physician.
safety guidelines
To reduce the risk of electric shock, burns, fire or other injuries, please follow
these safety precautions:
- Do not place your Solarise Light Therapy in water or near heated surfaces. To
prevent inadvertent contact with water, do not use your Solarise Light Therapy
while bathing and do not pick up the adapter or cord if your hands are wet.
Power source precautions
Use only approved power sources with your Solarise Light Therapy.
Before turning on your Solarise Light Therapy attach power cord to the
unit and then connect the cord to an adapter or outlet.
Turn the unit OFF before removing the adapter from any outlet.
Unplug the unit before cleaning.
Detach the power cord from the unit for safe storage.
Do not place items on top of the power cord.
Do not operate the unit if the cord or unit has been damaged. Should the
unit appear to be damaged, return to an approved service center for repair.
cautIon:
Keep the Solarise Light Therapy well out of children’s reach.
Do not use or place the unit near any open flames.
Do not use in bath.
Do not immerse the unit in water. It is not waterproof.
If you suffer from any of the conditions listed below, you should not use
the natural light until you have consulted your physician:
• During pregnancy
• Skin irritation/problem not to expose to sunlight or bright light
• Eye problem not to expose to bright light.
How to use solarise light therapy?
Most people respond best when they use their Solarise Light Therapy in the
morning. For best results, use the light at a slight angle to your face, and do
not look directly into the light. Sit about 20 inches away from the light and allow
the light to bathe over your face. Your eyes should be open for optimal results.
You can read, eat, work on the computer, watch T.V., put on make-up or use
it while you are exercising. If you find that you feel sensitive to the light, adjust
intensity (brightness) and duration (timer) settings. People usually start feeling
better within a few days of using the Solarise Light Therapy for 15-30 minutes
per day.
•
•
•
•
•
•
•
a.
b.
c.
d.
e.
6000 Lux the brightest) to simulate natural sunlight. It acts also as a light
(similar to sunlight) to help people affected by Seasonal Affective Disorder
(S.A.D.), also known as Winter Blues/Winter Depression, due to the shorten-
ing of sunlight especially in winter.
oPEratInG InstructIons
The Solarise Light Therapy provides users with:
Innovative digital LED 12 or 24-hour real time clock display with adjustable
brightness
Power failure backup
3-Programmed wake up alarm mode settings
Auto repeat of daily alarm
Volume control for alarm loudness
Snooze function
An adjustable countdown timer ranges of up to 99 hours and 59 minutes.
An adjustable luminosity for light wake-up uses
HoW to sEt tHE rEal tIME clocK?
Connect the adapter to the DC jack of the Solarise Light Therapy and plug
into the main power supply.
Press and hold the button for 2 seconds until either “12” or “24” digits
are flashing.
Press either the or button to select between 12-hour and 24-hour real
time clock display.
Press the button to confirm the setting and the “HOUR” display flashes.
Press either the or button to select the current time for hour.
Press the button to confirm the setting and the “MINUTE” display
flashes.
Press either the or button to select the current time for minute.
Press the button to confirm the setting and it will automatically return to
the real time clock mode. The real time clock setting is now completed.
notE
It will automatically return to the “REAL TIME CLOCK” mode 30 seconds
after the last key pressed.
When 12-hour display is chosen, only 1 blue-colored LED flashes in the
middle of the screen; the upper LED flashes for AM, the bottom LED
flashes for PM. 2 blue-colored LEDs flash if 24-hour display is selected.
Press button anytime at the clock setting mode, the display will
automatically return to the clock mode.
HoW to aDJust tHE BrIGHtnEss of tHE rEal
tIME clocK?
There are 10 different levels of brightness for the LED clock display to select by
simply pressing the or button.
notE
The “BEEP” alert sound will go off twice when its maximum or minimum
luminosity level is reached.
•
•
•
•
•
•
•
•
1.
2.
3.
4.
5.
6.
7.
8.
a.
b.
c.
HoW to turn tHE clocK DIsPlay off ?
The display can be turned off so as not to disturb your sleep by pressing
the button.
Press the button to turn the display off. The 2 blue-colour LEDs are still
ON as a nightlight.
Press the button again to turn all the LED off including 2 blue-colour
LEDs, alarm and timer indicator.
notE
Point 2 and 3 would not affect any setting of the alarm.
Once the preset alarm time arrives, the alarm will go off and the display will
automatically return to the clock mode.
HoW to turn tHE clocK DIsPlay BacK on?
The display can be turned back ON by pressing any button.
HoW to sElEct tHE alarM MoDEs?
There are 3 wake up alarm modes (Mode 1, 2 & 3) to choose and the switch
is located at the side of the unit. Simply switch to your desired alarm mode.
(See figure 1)
WHat arE tHE 3-ProGraMMED WaKE uP alarM
MoDEs?
fEaturEs of alarM MoDE 1:
The light intensity of Solarise Light Therapy increases gradually and naturally
like a sunrise 15 minutes prior to your preset wake-up time. There are 6 rows
of LEDs shown on the display screen and each row will be turned ON every 3
minutes in succession starting from the bottom row. (see figures a-e)
1.
2.
3.
a.
b.
Please note:
Individual results may vary. Solarise Light Therapy light therapy
should be taken as part of a healthy lifestyle and is not intended to diagnose,
treat, cure, or prevent any disease.
Display Instruction
The Solarise Light Therapy contains:
front View
Back/side View:
WHat Is solarIsE lIGHt tHEraPy?
The light intensity of Solarise Light Therapy increases gradually and naturally
like a sunrise 15 or 30 minutes prior to your preset wake-up time. The light
triggers the wake up process of your body naturally which can leave you more
refreshed and energetic.
The Solarise Light Therapy is powered by 72 bright LED light bulbs (up to
UP
LIGHT
SET
TIMER
DOWN
ALARM
SNOOZE
CLOCK
(15 mins before alarm goes off)
(12 mins before alarm goes off)
(9 mins before alarm goes off)
(6 mins before alarm goes off)
(3 mins before alarm goes off)
a.
b.
c.
d.
e.
Alarm mode 1
Alarm mode 2
Alarm mode 3
1.
notE
When the alarm goes off at the preset wake-up time, it will automatically
return to the Real Time Clock display.
The “Sunrise Lighting” program will be deactivated if any key is pressed
during the lighting up process. However, the alarm will still go off at the
preset wake-up time. Press to turn off the beep or press any other
button to activate the snooze.
fEaturEs of alarM MoDE 2:
The unit can also work as an ordinary alarm clock; it simply starts beeping
when the preset alarm time arrives. Press to turn off the beep or press any
other button to activate the snooze.
fEaturEs of alarM MoDE 3:
The light intensity of Solarise Light Therapy increases gradually and naturally
like a sunrise 30 minutes prior to your preset wake-up time. There are 6 rows
of LEDs shown on the display screen and each row will be turned ON every 6
minutes in succession starting from the bottom row. (see figures f-j)
notE
When the alarm goes off at the preset wake-up time, it will automatically
return to the Real Time Clock display.
The “Sunrise Lighting” program will be deactivated if any key is pressed
during the lighting up process. However, the alarm will still go off at the
preset wake-up time. Press to turn off the beep or press any other
button to activate the snooze.
HoW to sEt tHE alarM?
Choose your desired alarm mode.
Press and hold the button for 2 seconds to enter the alarm mode. The
preset alarm time will be shown on the display. The indicator will flash
during the setting.
Press the button and the “HOUR” display flashes.
Press either the or button to select the desired alarm hour.
a.
b.
a.
b.
1.
2.
3.
4.
Press the button to confirm the setting and the “MINUTE” display
flashes.
Press either the or button to select the desired alarm minute.
Press the button to confirm the setting and it is then returned to the
real time clock mode. The blue LED is ON to indicate the alarm is
activated.
notE
Please ensure that the blue LED alarm key indicator is ON after the alarm
is activated.
Press the button to activate or deactivate the alarm.
Press and hold the button for 2 seconds to check for the preset wake-
up time. The preset wake-up time is shown and then press the key to
exit after checking. Just press the button again to activate the alarm.
It will automatically return to the “REAL TIME CLOCK” mode 30 seconds
after the last key pressed.
When the preset alarm time arrives, the alarm goes off.
~ Press the button to stop the beeping permanently.
~ or Press any other button to activate the snooze function, the alarm will
go off again after the snooze time interval.
f. If the alarm is not manually turned off, it will stop beeping in 2 minutes.
The alarm will repeat beeping for two times. The time interval is
depending on the snooze setting. The volume of the beep can be
adjusted by the wheel located at the side.
HoW to sEt tHE snooZE functIon?
The snooze feature is pre-integrated to each programmed alarm mode. The
snooze alarm goes off twice according to your preset snooze time interval if
the unit is left unattended.
Press and hold the button for 2 seconds. The preset snooze time
interval is shown.
Press the button and the “MINUTE” display flashes.
Press either the or button to select the desired time interval.
Press the button to confirm the setting and it will automatically return to
the real time clock mode.
notE
When the preset alarm time arrives, the alarm goes off.
~ Press the button to stop the beeping permanently.
~ or Press any other button to activate the snooze function, the alarm will
go off again after the snooze time interval
b. If the alarm is not manually turned off, it will stop beeping in 2 minutes.
c. The time interval for the snooze feature can be set between 5 and 59
minutes inclusively.
HoW to sEt tHE countDoWn tIMEr?
Press and hold the button for 2 seconds. The preset countdown timer is
5.
6.
7.
a.
b.
c.
d.
e.
1.
2.
3.
4.
a.
1.
shown. The timer indicator will flash during the setting.
Press the button and the “HOUR” display flashes.
Press either the or button to select your desired time for hour.
Press the button to confirm the setting and the “MINUTE” display
flashes.
Press either the or to select your desired time and minute.
Press the button to confirm the setting and the bottom row of LED
bulbs flash from left to right. The timer indicator is ON to show the timer is
activated.
The alarm goes off when the time reaches 0:00
notE
The countdown timer can be set up to 99 hours and 59 minutes.
The countdown process can be terminated by pressing the button
again. The timer indicator is OFF to show the timer is deactivated.
Press the button to return to the real time clock mode while the count
down process is still being activated.
Press the button to stop the beeping sound while the alarm goes off.
HoW to usE tHE natural lIGHt WaKE uP
clocK?
The Solarise Light Therapy is powered by bright LED bulbs, which simulate
natural sunlight which can be insufficient especially in winter. Ordinary light
fittings used at home or office are not strong enough with only of about 200-
500 lux, which is a unit of lamination equal to one lumen per square meter.
The LED bulbs used on the Solarise Light Therapy emit light intensity of about
6000 lux. This special Light clock should be used 15 to 60 minutes daily for
at least 7 consecutive days or longer if required. Normal activities, such as
reading, writing, eating etc, can be carried out while stationary in the front of
the light clock.
Press the button to turn all the LED bulbs ON.
There are 10 different levels of brightness for the light intensity to select by
simply pressing either the or button.
Press the button again to turn all the LED bulbs OFF.
notE
The “BEEP” alert sound will go off twice when its maximum or minimum
luminosity level is reached.
It is not recommended to stare at the light, just carry on your activities as
usual.
Tinted lenses, or any device that blocks the light to your eyes, should not
be worn.
HoW to sEt tHE lIGHt WaKEnInG clocK WItH
tIMEr?
Press the button to turn all the LED bulbs ON.
Press the key and the auto light shut off timer is shown.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
1.
2.
3.
a.
b.
c.
1.
2.
Z
Z
Z
(30 mins before alarm goes off)
(24 mins before alarm goes off)
(18 mins before alarm goes off)
(12 mins before alarm goes off)
(6 mins before alarm goes off)
f.
g.
h.
i.
j.
Wallmount
Holes
DC Jack
Stand
Alarm Mode
1,2,3
Volume
Unit & Adapter
Travel Pouch
