Page 7
IMPORTANT
For Household Use Only
Filling Instructions:
Do not plug the unit in until you have filled the Water Tank
1. Set the appliance on a steady work surface.
2. Unlock the Locking Knob.
3. Raise the Pressing Plate.
4. Filling the Water Tank: In areas of hardwater, use Distilled Water.
Slide the Water Tank forward.(Fig. 1) Using the filling container, pour
distilled water into the tank; slide the Water Tank back into the unit.
OPERATION INSTRUCTIONS
1.Turn the power to the "on" position (Fig. 2).
2. Identify the type of fabric you will press and then select the temperature
setting that matches the fabric to be pressed. It is best to start with the most
delicate fabrics first, as higher heat will cause damage to Nylon and Silks
3. The press is ready for use when the Green Indicator Light turns off.If pressing
cottons and linens, steam burst will be available when the Yellow Steam Indicator
Fig. 1
Fig. 2
power switch
4. Do not activate the burst of steam when the unit is completely closed.
Best results are obtained if the press is held open (approximately 3”)
before activating the burst of steam.