IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety precau-
tions should always be followed, including the
following:
READ ALL INSTRUCTIONS
BEFORE USING.
KEEP AWAY FROM WATER
DANGER-
Any appliance is electrically
live even when the switch is off. To reduce the
risk of death by electric shock:
1.
Always unplug it immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or other
liquid.
5. If an appliance falls into water, unplug it
immediately.
Do not reach into the water.
WARNING-
To reduce the risk of burns,
electrocution, fire, or injury to persons:
1. This appliance should never be left
unattended when plugged in.
2. Do not pull, twist, or wrap line cord
around appliance, even during storage.
3. This appliance should not be used by, on
or near children or individuals with certain
disabilities. Unsupervised use could result in
fire or personal injury.
4. Use this appliance only for its intended use, as
described in this manual. Do not
use attachments not recommended by
the manufacturer.
5. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly or if it has been dropped or dam-
aged, or dropped into water. Return the
appliance to an authorized service centre
for examination and repair.
6. Keep the cord away from heated surfaces.
7. Never use while sleeping.
8. Never drop or insert any object into any
opening or hose.
9. Do not use outdoors or operate where aerosol
(spray) products are being used or where
oxygen is being administered.
10.Unit is hot when in use. Do not let eyes or
bare skin touch heated surfaces.
11.Do not place the heated unit directly on any
surface or on the appliance cord while it is
hot or plugged in. Use the stand provided.
12.Never block the air openings of the appliance
or place on a soft surface, such as a bed,
couch, or towel, where the air openings may
be blocked. Keep the air openings free of lint,
hair, and the like. Unplug before storing.
13.Do not use an extension cord with this
appliance.
14.Do not touch hot surfaces of the appliance.
Use handles or knobs.
15.Before plugging in read the information about
dual voltage contained in the instruction
section of this manual.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This straightening iron is intended for household
use. This unit is designed to operate at 125/250
volts AC. Use on Alternating Current (50/60 hertz)
only.
This appliance has a polarized plug (one blade
is wider than the other.) As a safety feature, this
plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety
feature.
DUAL VOLTAGE
This straightening iron will automatically adjust
to the proper voltage. Use an adapter plug with
correct configuration, prior to use in outlet.
TO STRAIGHTEN HAIR
Hair should be clean and completely dried before
using the straightening iron. Plug the iron into an
electrical outlet. Turn on unit. The power indicator
light should become illuminated. Allow unit to
heat up for several minutes.
WARNING: The straightening iron’s nano
titanium ceramic coated plates will get very
hot within a few seconds and should not
be placed in contact with the skin after the
straightening iron has been turned on.
GETTING STARTED
The straightening iron’s 25 temperature settings
and Instant Heat heat-up technology combine to
provide styling versatility for all hair textures. If
you have fine hair, a low temperature will provide
the best results. If you have thick, wavy or
hard-to-straighten hair, keep the heat setting
high. You can vary the straightening iron’s
temperature according to your particular need!
STRAIGHTENING BASICS
Plug the straightening iron cord into any house-
hold outlet (125/250V, red light to go on). Press
“ON” button. The iron will heat up very quickly.
The green indicator light will stop blinking and
remain on when the iron is ready to use. To turn
off, press “OFF” button (green light will go off).
Never leave your straightening iron on and unat-
tended.
Start with a hair section that is 2” wide and no
more than ½” thick. Open the iron and place a
hair section between the two hot plates, close to
the scalp. Trap hair between the plates by firmly
squeezing the handles together. While maintaining
the tension, slowly pull the unit down along the
hair section toward the end of hair. For best
results, use a light styling lotion before blow-drying
hair. At the end of hair section, release the pressure
on the handle and allow the hair section to slide
out. Repeat process on additional sections of hair
until you achieve the hair style you desire. It may
be necessary to repeat process on certain areas,
depending on the texture of your hair.
Some experience is necessary when learning
to use this straightening iron. After using iron
several times, you will learn the ideal way to
straighten and style your hair easily.
STYLING WITH THE NEW EASY-GLIDE NANO
TITANIUM CERAMIC-COATED PLATES
The plates of your new straightening iron have
an Easy-Glide nano titanium ceramic-coated
surface, the newest technology.
This means it’s not only simpler to clean off styling
product residue after each use, but you’ll also
find that hair glides easily over the surface of the
plates as you’re straightening.The nano titanuim
ceramic-coated surface also helps smooth
down flyaways and frizzies. As you smooth each
strand, heat is evenly distributed so that the style
you create has a salon-perfect, silky smooth,
shining finish. Hair slips right off the plates after
it’s straightened.
The new nano titanium ceramic technology is a
pleasure to work with because it makes styling
your hair easier and the results more professional.
USING INSTANT HEAT, THE 25 VARIABLE
TEMPERATURE SETTINGS & UNIFORM HEAT
RECOVERY SYSTEM
This straightening iron features Conair’s Instant
Heat technology. It heats up quickly after to the
temperature you’ve selected for your hair type
and is then ready to use.
Within this Instant Heat technology there are
25 variable temperature settings for every type
of hair, from the finest to the curliest and most
resistant. Select the temperature range that’s
suitable for that hair type to help you create the
look you want.
Temperature Setting Guide
Temp. Setting
Hair Type
Low 1-5
Delicate, thin, easy-to-
straighten hair
Medium 6-11
Average to thick or
treated hair
Med-High 12-20
Thick or wavy hair
High 21-25
Hard-to-straighten hair
And that’s not all. Conair’s professional salon
standards of engineering provide you with a
Uniform Heat Recovery System that maintains
the straightening iron at a constant temperature.
There is a constant surge of power to ensure that
heat is continuously delivered for optimal styling
results, unlike other units which lose heat during
use. This provides consistent styling power so
that every strand of your hair is set with the
same level of heat and comes out the same way
for a perfect finish.
REMOVABLE COMB
Your straightening iron includes a removable
comb attachment. The hard bristle comb will help
to provide tension and guide your hair as you use
the straightening iron. To remove or attach the
comb, turn unit off and allow unit to cool. Hold
unit firmly with one hand; with your other hand,
slide comb away from the iron to detach it. When
attaching the comb, align it with the slot on the
side of the iron and slide comb into position.
Make sure the comb securely locks into position.
Removable
Comb Attachment