TO CURL HAIR
For best results, use
a light styling
product before
blow-drying hair.
1
Take a 1 in. wide
section of hair, starting
2 in. from the scalp.
2
Wind the section
of hair around the thicker
portion of the barrel
towards the cool tip.
3
Hold the end of the
hair section in place at
the cool tip for 5 to 8
seconds depending on
hair type, and then release. No clamp allows
you to easily curl hair without kinks.
Spiral
guide sets curvy, tangle-free spirals.
For
tighter, bouncier curls, roll less hair. For loose,
free flowing curls, roll more hair. To set the
curl, do not comb or brush hair until it cools.
4
Repeat process on additional sections of
hair until you achieve the hair style you desire.
Some experience is necessary when learning
to use this curling wand. After using several
times, you will learn the ideal way to curl and
style your hair.
IMPORTANT
A heat protective glove has been supplied to help
protect your hand from temporary contact with the
barrel when wrapping the hair around the
appliance.
Please note that the heat protective glove is only
designed to give initial contact protection. Discomfort
will be caused by prolonged contact with the hot
surface.
USING INSTANT HEAT, THE 5 ULTRA-HIGH
HEAT TEMPERATURE SETTINGS
This styling wand features a ceramic heater that
maintains constant temperature during use for
precision styling.
This Instant Heat technology has 5 ultra-high heat
temperature settings. There is a temperature range
that’s gentle and safe for every type of hair, from
the finest to the most resistant, and helps you
create the look you want.
UNIFORM HEAT RECOVERY SYSTEM
Conair’s professional salon standards of engi-
neering provide you with a uniform and improved
heat recovery system that maintains the wand
at constant temperatures. There is a constant
surge of power to ensure that heat is continu-
ously and quickly delivered for optimal styling
results, unlike other units, which lose heat dur-
ing use. This provides consistent styling power
so that every strand of your hair is set with the
same level of heat and comes out the same way
for a perfect finish.
