Con-Treat Grinder Dolly, Инструкция по безопасности, эксплуатации и каталог запасных частей, Страница: 5 / 15

Page 4
Assembly instructions
22. The Dolly is designed to be fitted to Metabo 9” Hand grinder s that has a suitable diamond disk and a dust
shroud fitted to it. The intention is that the hand grinder can be used without the user being on their hands
knees.
23. Other Brands of hand Grinders may fit but it is not guaranteed
24. Due to the Nature of hand grinders it is almost impossible to simulate the ability to follow the floor when
using a D handle, Due to this, the dolly may be susceptible to leave groves and gouges and also miss certain
sections of the floor that are lower. This can be expected.
25. This Dolly is supplied with the following fasteners.
26.
27.
28.
2X M14 X 25
With spring washer
For side arms
Do not over tighten!
1 X M14 X 30
With spring and flat washer
For top chassis mount
Tighten!
3 X Cable Ties
For clamping switch and
holding excess cable onto the
handle