1
step
2
step
3
step
4
step
5
step
6
step
7
step
8
step
9
step
to begin installation, shut down your computer.
Connect the Comwave Internet Modem using the
supplied telephone cord to the phone jack.
Connect the supplied Ethernet Cable from the LAN port
of the Comwave Internet Modem to your computer.
(For Home Phone)
Connect the supplied Ethernet cable
from the LAN port of your Comwave Internet Modem
to the WAN port of the Home Phone Adapter.
Connect the Comwave Internet Modem to a power
outlet
Note:
Wait until the
LED Light Indicators
on your
Comwave Internet Modem indicate that the Modem
is operational. this may take up to 5 minutes.
(For Home Phone)
Connect a telephone to the PHONE 1
port on the Home Phone Adapter.
Connect the Home Phone Adapter to a power outlet
and wait 5 minutes for a dial tone.
DO NOt DISCONNECt POWER
as it may damage the
Home Phone Adapter.
Start your computer. You should be able to browse
the internet instantly.
test your phone line, you should have a dial tone
and be able to make calls.
Can’t access the Internet?
4
5
1
2
3
Unplug the power to your
Comwave Internet Modem,
Home Phone Adapter and
shut down your computer.
Wait 30 seconds and then
plug your Comwave Internet
Modem’s Power Cord back
into the power outlet.
Wait until the LED Light
Indicators on your Comwave
Internet Modem indicate the
Modem is operational. this
may take up to 5 minutes.
Start your computer and plug
in the Home Phone Adaptor
into a power outlet.
Open your browser and start
surfing the Internet. Check for
a dial tone.
