116 - Configuration Pages
RocketLinx MP1204-XT User Guide
: 2000644 Rev. A
Spanning Tree | CIST Ports
Spanning Tree | CIST Ports
Use this page to review the current STP CIST port configuration and if needed, change them. This page
contains settings for physical and aggregated ports.
Item
Configuration | Spanning Tree | CIST Ports
Port
The MP1204-XT port number of the logical STP port.
STP Enabled
Controls whether STP is enabled on this MP1204-XT port.
Path Cost
Controls the path cost incurred by the port. The
Auto
setting sets the path cost as
appropriate by the physical link speed, using the 802.1D recommended values.
Using the
Specific
setting, a user-defined value can be entered. The path cost is used
when establishing the active topology of the network. Lower path cost ports are
chosen as forwarding ports in favor of higher path cost ports. Valid values are in the
range 1 to 200000000.
Priority
Controls the port priority. This can be used to control priority of ports having
identical port cost. (See above).
operEdge
(state flag)
This is an operational flag describing whether the port is connecting directly to edge
devices. (No Bridges attached). Transition to the forwarding state is faster for edge
ports (having
operEdge
true) than for other ports. The value of this flag is based on
AdminEdge
and
AutoEdge
fields. This flag is displayed as
Edge
on the
Monitor
Spanning Tree | STP Detailed Bridge Status
page.
Содержание RocketLinx MP1204-XT
Страница 28: ...28 Installing the Hardware RocketLinx MP1204 XT User Guide 2000644 Rev A System Reset ...
Страница 36: ...36 Web Interface Overview RocketLinx MP1204 XT User Guide 2000644 Rev A Ending a Session ...
Страница 180: ...180 Configuration Pages RocketLinx MP1204 XT User Guide 2000644 Rev A Configuration DDMI ...
Страница 414: ...414 Glossary RocketLinx MP1204 XT User Guide 2000644 Rev A Y ...
