5
Using Telnet to Configure the IP Address
You must have the MP1204-XT connected to your network.
1.
Open the command prompt and enter
telnet 192.168.250.250
.
2. Enter
admin
as the
Username and press the
Enter
key.
3. Enter
admin
as the
Password and press the
Enter
key.
4. Enter
enable
and press the
Enter
key.
5. Enter
configure terminal
and press the
Enter
key.
6. Enter
interface vlan 1
and press the
Enter
key.
7. Enter
ip address
###.###.###.### ###.###.###.### (the IP address –
space – subnet mask) and press the
Enter
key.
8. Move the Ethernet cable to the appropriate network.
9. Close the telnet session.
10. Save the new IP address
to the flash, enter
telnet
and the new IP address.
11. Enter the
Username
and
Password
.
12. Enter
copy running-
config startup-config
and press the
Enter
key.
You can now open the MP1204-XT web interface to configure it to your
environment.
Using the Console Port to Configure the IP Address
Connect the console cable as previously described. The following example
illustrates using puTTY.
