signal must be present before the serial port will become active.
Once the controller is found, you can enable the individual ports using the enable command.
Consult your system documentation for further information on the enable command. The
following example enables port ttyh00 and appends the changes to the /etc/inittab file:
enable ttyh00
With the device driver installed and the communication ports enabled, the controller is now
ready for use.
Technical Support
Comtrol Corporate Headquarters:
•
Internet URL:
www.comtrol.com
•
email:
•
FTP site:
ftp.comtrol.com
•
Phone: (612) 494-4100
•
FAX: (612) 494-4199
Comtrol Europe:
•
Internet URL:
www.comtrol.co.uk
•
email:
•
Phone: +44 (0) 1 869-323-220
•
FAX: +44 (0) 1 869-323-211
