36 -
DeviceMaster UP PROFINET CbA User Guide
: 2000409 Rev. D
Chapter 4. Commissioning the DeviceMaster UP
Rules for Interconnection
4.5.2.
Rules for Interconnection
The following provides the rules for interconnection:
•
An interconnection can only be set up between an output and an input. You can interconnect an output
with several inputs, but you can only interconnect an input with one output.
•
The two connectors of an interconnection must be of the same data type (for example, both of type
UI2
or
type
BOOL
)
•
Connectors with composite data types must be of the same type (that is, arrays and structures must have
the same structure).
4.5.3. Requirements
The PROFINET CbA components containing the technological functions must already be inserted into the
project. For more information, see
4.3. Inserting the PROFINET CbA Component into a SIMATIC iMap
4.5.4. Procedure
If you change the settings of objects (for example, interconnections) in SIMATIC iMap, they do not take
immediate effect on the plant. These changes will not become active until you download the interconnections
to the DeviceMaster UP. For more information, see
4.9. Downloading Interconnections from SIMATIC iMap
The following task describes how to create an interconnections between technological functions.
1.
Open the
Plant View
.
2.
If desired, select
View > Plant view > Display Interconnection Lines
to show or hide the interconnection lines.
3.
Click a connector. The connector changes color, and the shape of the cursor also changes.
Note:
If you want to connect several inputs to one output, hold down the
CTRL
key and select the required
inputs.
4.
Select one of the following options:
•
Hold down the left mouse button and drag to the second connector.
•
Click the second connector of the interconnection.
If you selected several inputs using the
CTRL
key, release the
CTRL
key and select the required
output.
In this procedure, compatible connectors are always highlighted in color.
Содержание DeviceMaster Up
Страница 1: ...PROFINET CbA User Guide ...
