11
II.
Quick Setup
II-1. Initial Setup
1.
Connect the access point to a computer via Ethernet cable.
2.
Connect the power adapter to the access point’s 12V DC port and plug the
power adapter into a power supply.
3.
Please wait a moment for the access point to start up. The access point is
ready when the LED is
Blue
.
4.
Set your computer’s IP address to
192.168.2.x
where
x
is a number in the
range
3 – 100
. If you are unsure how to do this, please refer to Appendix
V-1. Configuring your IP address
for more information.
DHCP is enabled on the access by default. If no DHCP Service is
found, the access point will default to IP address 192.168.2.2.
5.
Enter the access point’s default IP address
192.168.2.2
into the URL bar of
a web browser.
6.
You will be prompted for a username and password. Enter the default
username “admin” and the default password “1234”.
Содержание WAP-PC1750W
