Comtrend Corporation WAP-5883, Быстрое руководство по установке, Страница: 10 / 16

You’ll be prompted to input the
access point’s wireless security
key. Input it in the ‘KEY’ field
and click ‘Next’ to continue.
Upon successful Connection
Test completion the following
message will be displayed.
Click ‘Next’ to continue.
Recheck the settings you have
made, and click ‘Apply’ to
continue.
Wait for a few moments for the
Wireless-N Range Extender to
reboot. After rebooting, you
can connect to the access
point and use it to access the
network / Internet.
Use an Ethernet cable and
connect it to the Ethernet port
of your networking device.
Note: If you wish to run Quick Setup again or had problems logging into the
web UI, push the ‘WPS’ button for 10 seconds until the ‘ POWER ’ LED starts
blinking, and the device will reset to factory defaults.
9