46
IGMP Snooping:
Standard Mode: In standard mode, multicast traffic will flood to all
bridge ports when no client subscribes to a multicast
group – even if IGMP snooping is enabled.
Blocking Mode: In blocking mode, the multicast data traffic will be
blocked and not flood to all bridge ports when there are
no client subscriptions to any multicast group.
Enable LAN side firewall:
Enable by ticking the checkbox
;
.
DHCP Server:
To enable DHCP, select
Enable DHCP server
and enter Start and
End IP addresses and the Leased Time. This setting configures the
router to automatically assign IP, default gateway and DNS server
addresses to every PC on your LAN.
Setting TFTP Server:
Enable by ticking the checkbox
;
. Then, input the TFTP
server address or an IP address.
Static IP Lease List:
A maximum of 32 entries can be configured.
To add an entry, enter MAC address and Static IP address and then click
Apply/Save
.
To remove an entry, tick the corresponding checkbox
;
in the Remove column and
then click the
Remove Entries
button, as shown below.
Содержание VR-3031u
