Comtrend Corporation VD-21IRVF, Руководство пользователя

Страница: 10 / 64

P 07
Installation
Chapter 2.
Setup 1.
Setup 2.
Push the housing release tab and
remove the cover. Insert a Micro SD
card (Optional) for on device storage.
Setup 4.
Setup 5.
Setup 3.
Connect the camera to a *PoE
switch or *PoE injector.
Make sure the network connection
is stable .
Connect the network cable to the
camera.
Setup 6.
Re ‐ mount the cover.
Setup 7.
Make sure to keep the camera cover
closed and the network cable output
fed through the desired path.
Fix the camera on the wall or ceiling
with supplied screws and twist the
camera to the desired viewing angle.
Adjust the tilt angle and focus as
necessary.
PoE (RJ-45)
2.1. Installation
Follow the instructions below to setup your
network camera.
＊ . This network camera can
only use PoE power.
www.comtrend.com