Comtrend Corporation PowerGrid-9171n Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 55

Comtrend Corporation PowerGrid-9171n Скачать руководство пользователя страница 15

Chapter 4 IP Interface

4.1 IP config

In

the

IP configuration

tab of one G.hn node, the IPv4 and IPv6 settings can be read and changed.

IPv4 subsection:



DHCPv4 enabled

: in the case of choosing "No" (i.e fixed) IP configuration in the previous option, the

IPv4 Address, Subnet Mask, Default Gateway and DNS IPv4 Address should be configured; fill these
fields in. In the case of choosing “Yes” (i.e DHCP) they will be filled automatically when configuration

is received from the DHCP server.

IPv6 subsection:



DCHPv6 enabled

: to enable the IPv6 DHCP configuration or choose not to.



DHCPv6 Address

: to read the node's DHCPv6 address in case the DHCPv6 is enabled.



IPv6 Link Local Address

: to read the node's Link Local address.



Manual IPv6 Manual Address

: to configure up to four IPv6 Manual Addresses for the node.



DNSv6 Address

: to configure the DNS address.

«
...
13
14
15
16
17
...
»

Содержание PowerGrid-9171n
























































Отзывы:

Нет отзывов