16
•
The device extends the IP subnet at the remote service provider to the
LAN PC. i.e. the PC becomes a host belonging to the same IP subnet.
•
The device bridges the IP packets between WAN and LAN ports, unless
the packet is addressed to the device’s LAN IP address.
Use Static IP Address
Unless your service provider specially requires this setup, do not select it.
If selected, enter your static IP address in the IP Address field.
Enable PPP Debug Mode
When this option is selected, the system will put more PPP connection information
into the system log. This is for debugging errors and not for normal usage.
STEP 5:
Click
Next
to display the following screen.
Enable IGMP Multicast
Tick the checkbox
;
to enable IGMP multicast (proxy). IGMP (Internet Group
Membership Protocol) is a protocol used by IP hosts to report their multicast group
memberships to any immediately neighboring multicast routers.
Enable WAN Service
Tick the checkbox
;
to enable the WAN service.
Service Name: This is the WAN Service label.
STEP 6:
Upon completion, click
Next
. The following screen appears.
