Page 4
PR-75a SETUP AND OPERATION
Monitoring Capabilities
Because each monitoring application requires a different
headphone or transducer to best satisfy each listening
need, the PR-75a can source a strong audio signal
(200 mW) to either stereo or mono headphones
with an impedance as low as 16 ohm.
A hearing aid type button receiver may
be used with an impedance as high as
2k ohm and still produce a strong
audio signal.
The PR-75a is ideal for use with the
COMTEK NTC-102 neckloop
transductor and wireless IR-230
miniature universal-fit ear canal
inductor receiver or with hearing
aids having a “T” switch.
Can be used with consumer or
professional headphones.
Can be used with
hearing aid button
receivers for assistive
listening or acoustic
ear tube for IFB
application.
Can be used to
drive neckloop for
use with IR-230
inductor receiver or
hearing aids.
